Version: 4.16 Time: 13.06.2013 05:01:35 Tester: 1 PCB: 0127300000036785 Calibration: 31, 99.83%, 97.14%, 95.61%, 99.95%, on 13.06.2013 02:57:28 Site: Manufacturer A TESTING: Powering On... INFO: I_MAIN_RESET=76 mA (min=50, max=500, abort=700) [ok] INFO: I_BATT_RESET=233 uA INFO: I_AUDIO_RESET=19 uA PASSED: successfully completed (0.839 s) TESTING: Waiting for JTAG Device detection... INFO: JTAG Clock: 2.600 MHz INFO: Intel PXA300 Stepping A1 PASSED: successfully completed (0.062 s) INFO: Reset input high after 10 ms INFO: nRESET_OUT deasserted in 2410 ms (<6000 ms) INFO: NAND UID: ec 00 3c ec 99 23 32 39 32 34 30 33 1d 1d 04 0b INFO: Building Bad Block Relocation Table... INFO: Found BAD Block 224 in Data Area, relocated to 1023 INFO: Found BAD Block 372 in Data Area, relocated to 1022 INFO: Found BAD Block 607 in Data Area, relocated to 1021 INFO: Total BAD Blocks: 3 TESTING: CPLD Connections... INFO: Erasing CPLD... INFO: Successfully Erased PASSED: successfully completed (0.738 s) TESTING: ASIX Connections... INFO: ASIX Successfully Powered Down PASSED: successfully completed (1.123 s) INFO: I_MAIN_HALT=171 mA (min=155, max=210, abort=500) [ok] INFO: I_BATT_HALT=132 uA INFO: I_AUDIO_HALT=8 uA TESTING: Data Address LoopBack... PASSED: successfully completed (0.015 s) TESTING: GPIO Test... INFO: Testing 83 Plugboard GPIOs PASSED: successfully completed (0.217 s) TESTING: Flash Pattern Write/Verify... PASSED: successfully completed (0.911 s) INFO: Erasing ConfigBlock at 40000 INFO: Set DUT IP to 10.4.0.230 INFO: Writing New ConfigBlock at 40000 TESTING: Writing Bootloader to FLASH... INFO: Preset Baudrate: 9600 INFO: Using \Images\eboot_4.1.bin, base:0x0, size:0x39000 (228.00 KB) PASSED: successfully completed (91.604 s) TESTING: Booting and Waiting for BOOTME... Toradex Bootloader 4.1 for Colibri Built Sep 14 2012 Press [SPACE] to enter Bootloader Menu Starting RAMTest at 0x5C000400, len=0x0003FC00, (Cached) RandomNr Test: Writing... RandomNr Test: Verifying... RAMTest finished successfully. Starting RAMTest at 0x80100000, len=0x03F00000, (Cached) RandomNr Test: Writing... RandomNr Test: Verifying... RAMTest finished successfully. RandomNr Test: Writing... RandomNr Test: Verifying... Trying to build bad block table...Not needed, already exists. Printing bad block table: 224 relocated to block 1023 372 relocated to block 1022 607 relocated to block 1021 BadBlock flags: 0xFFFFFFFF Deleting Flash Registry (01400000-01480000) Unprogrammed CPLD found. Updating the CPLD with FW version V1.8...done. Colibri PXA300 208 V1.3A SerialNo: 2507493 NAND Flash K9F: 125 MB, SDRAM: 64 MB Core Voltage: 1100 mV CPU: PXA300 A1 208 (104), HSIO: 156, MEM: 104, DDRRAM: 260, SRAM: 208, LCD: 156 Set MAC: 00:14:2D:26:42:E5 INFO: Trying to initialize the built-in Ethernet Controller... operating at 100M full duplex mode INFO: AX88796 Ethernet Controller initialized. INFO: MAC address: 0-14-2D-26-42-E5 INFO: Using device name: 'COLIBRI17125' PASSED: successfully completed (15.300 s) TESTING: Downloading IMAGE over ETHERNET... INFO: Using \Images\nk_ce5_4.1.bin, base:0x80100000, size:0x1380000 (19.50 MB) +EbootSendBootmeAndWaitForTftp Sent BOOTME to 255.255.255.255 Packet has the following data: boot.bin[NULL]octet[NULL]blksize[NULL]1024[NULL] TFTP packet could have 2 name/value pairs Locked Down Link 1 Src IP 10.4.0.230 Port 03D4 Dest IP 10.4.38.54 Port 041D Default TFTP block size set to: 512 bytes This TFTP packet contains 1 options. We currently only look at the first and expect it to be BLKSIZE. The packet's option name is blksize. The option's value is 1024 with a value that is in range. BLKSIZE will be adjusted to 1024. EthDown::TFTPD_OPEN::boot.bin An OACK packet is the proper acknowledgement -EbootSendBootmeAndWaitForTftp FLASH download [ 0x00080000 ==> 0x013FFFFF ] INFO: Download Time: 9392 (W: 3319, R: 5759) INFO: FlashWrite: 0x00080000 to 0x013FFFFF. Please wait: 100% Using ECC... Decompressing IMAGE(8178628, 16416204) from FLASH(00080000) to RAM(80100000)... Jumping to image at 0x80100000.. PASSED: successfully completed (15.888 s) . Got EDBG_CMD_JUMPIMG Got EDB TESTING: Booting IMAGE and running ColibriTester... G_CMD_CONFIG, flags:0x00000000 Toradex Windows CE 5.0 IMAGE 4.1 for Colibri Built Sep 14 2012 Sp=ffffc7cc Idle Mode Enabled Loading FlashFileSystem...Done Loading AsixEthernetDriver...Done Loading AudioDriver...AC97Codec not found Loading USBHostDriver...Done Loading USBFunctionDriver...Done Loading BTUARTSerialDriver...Done Loading STUARTSerialDriver...Done Loading SDIODriver...Done Loading DisplayDriver...Done Loading Keyboard/MouseDriver...Done Loading TouchDriver...AC97Codec not found No external RTC found Looking for ColibriTester... Found ColibriTester.exe Found ColibriTester.ini Launching ColibriTester.exe INFO: Colibri Tester v5.4 TESTING: Testing AC97 Codec... INFO: No AC97 on Colibri300 1.3, Skipping Tests PASSED: successfully completed (0.112 s) TESTING: Initialize Flash File System... INFO: Internal Flash INFO: Formatting Store... (be patient this can take a while) ........ PASSED: successfully completed (0.636 s) OK PASSED: successfully completed (7.805 s) INFO: Total errors: 0 INFO: Total test time: 131.358 s